Home › Flooring Installation Cost

How Much Does Flooring Installation Cost? A Phoenix, AZ Guide

Installer measuring a new wide-plank luxury vinyl floor in a bright Phoenix living room, with tile, laminate and LVP samples on the floor (illustration)

New flooring typically costs $4 to $15 per square foot installed, or about $2,000 to $7,500 for 500 square feet. Laminate and luxury vinyl plank sit at the low end, tile and hardwood at the high end. Removing an old floor and leveling the slab are extra, and in many Phoenix homes they are a big part of the job.*

Flooring Packages and Price Ranges

Essential

Laminate flooring

$4–$14*

per sq ft, installed

Bedrooms, offices and living rooms on a budget

  • Laminate planks with underlayment
  • Installed over a checked, prepped slab
  • Baseboards undercut or reset, transitions at doorways
  • Free in-home measure and samples
  • Ask about warranty coverage
Get My Quote

Premium

Porcelain or ceramic tile

$12–$50*

per sq ft, installed

Kitchens, baths and main living areas

  • Porcelain or ceramic tile, set in thinset
  • Slab flattened and crack isolation where needed
  • Grout and transitions included in the plan
  • Free in-home measure and samples
  • Ask about warranty coverage
Get My Quote

*Pricing based on national cost ranges, per square foot with installation. Removing an old floor and leveling the slab are priced separately. Your price comes from a written estimate after a free in-home measure.

This guide sets out what national cost guides say new flooring costs, keeps their figures separate rather than blending them, and explains which parts of the price move most in a Phoenix home. For a number on your own house, request a free estimate; for how we work, start with flooring installation in Phoenix.

Flooring cost by type

The floor you choose moves the price more than anything else. These are installed prices per square foot, materials and labor together:

FlooringInstalled, per sq ftSource
Laminate$4–$14HomeGuide
Luxury vinyl plank / tile$4–$16HomeGuide
Hardwood$11–$25HomeGuide
Tile floor (ceramic, porcelain, stone)$12–$50HomeGuide
Carpet$3.50–$11HomeAdvisor

A few notes on reading this table. The ranges are wide because each one covers budget products through premium ones. Tile has the widest spread: a basic ceramic tile in a simple room sits near the bottom, while large-format porcelain or natural stone with a pattern sits near the top. Hardwood here covers solid and engineered boards; in Phoenix, engineered is the usual choice on a slab. Compare the two most popular budget floors in our LVP vs. laminate guide.

What a typical project costs

Angi puts an average flooring installation at $3,161, with most projects between $1,530 and $4,860, and about $12.50 per square foot. Angi's own examples at that rate:

Room sizeSquare feetAngi example
10 × 10 ft100$1,250
10 × 12 ft120$1,500
12 × 12 ft144$1,800

HomeGuide puts a 500-square-foot project at $2,000 to $7,500, with materials from $1 to $50 per square foot and labor from $2 to $8 per square foot.

The costs people forget: removal and prep

In Phoenix the old floor is often tile, and tile is the hardest floor to take out. These are the extra line items to expect:

ExtraFigureSource
Tile removal$2–$7 per sq ftHomeGuide, Angi
Dust-free tile removal$3.50–$7 per sq ftAngi
Underlayment, where the floor needs it$0.50–$5.40 per sq ftAngi
Asbestos removal, if old flooring tests positive$5–$20 per sq ftAngi

Slab prep is priced from what we find: grinding high spots, filling low ones, crack isolation under tile and a moisture barrier where the product calls for it. It is the part of the job that is hardest to quote without seeing the floor, and the part that decides whether the new floor lies flat. In older homes, the EPA lists vinyl floor tiles, vinyl sheet backing and some adhesives among places asbestos may be found, so original vinyl or black adhesive gets tested before anyone grinds it. See floor removal and subfloor prep.

What changes the price in a Phoenix home

  • Floor type and product grade. The biggest factor, shown in the table above.
  • What is coming out. Carpet comes up quickly; tile set on a slab takes far longer.
  • Slab condition. Large-format tile and long planks need a flatter slab than small tile or carpet.
  • Layout. Herringbone, diagonal tile, many doorways, closets and stairs all add labor.
  • Trim. Baseboards removed and reset, undercut door jambs and thresholds at each transition.
  • Moving things. Furniture, and appliances such as a refrigerator or washer, need to come out and go back.

Why we show sources instead of one number

HomeGuide, Angi and HomeAdvisor gather their numbers differently and cover different project sizes, so averaging them would produce a figure none of them published. We would rather show each one and give you a real number for your house after an in-home measure.

How to keep the cost down

  • Match the floor to the room. Put the premium floor where it shows and gets wet, and a mid-range floor in bedrooms and closets.
  • Ask whether the old floor must come out. Flat, well-bonded tile can sometimes stay under LVP; see can you put LVP over tile.
  • Do whole rooms at once. One continuous floor needs fewer transitions than several small jobs.
  • Get it in writing. Ask for material, removal, prep and installation as separate lines so you can compare quotes line by line.
  • Check the license. Look up any installer on the Arizona Registrar of Contractors search before you sign.

Homes in Arcadia and Moon Valley are often older and more likely to have tile or vinyl to remove first. Newer homes in Desert Ridge and North Phoenix are more often replacing builder carpet, which comes up faster.

Flooring Cost Questions

What is the average cost to install flooring?

Angi puts a typical flooring installation at about $3,161, within a $1,530 to $4,860 range, and about $12.50 per square foot. HomeGuide puts new flooring at $4 to $15 per square foot installed. Both are national figures.

How much is labor to install flooring?

HomeGuide puts flooring labor at $2 to $8 per square foot. Labor is higher for tile, patterns such as herringbone, stairs and rooms with many doorways.

How much does it cost to remove old tile?

HomeGuide and Angi both put tile removal at $2 to $7 per square foot; Angi lists dust-free removal at $3.50 to $7 per square foot.

What is the cheapest flooring to install?

Laminate and luxury vinyl plank are usually the least expensive hard floors to install, at $4 to $14 and $4 to $16 per square foot installed in HomeGuide's ranges. Carpet is also at the lower end.

Why don't you publish Phoenix prices?

We have not published a verified Phoenix average, and a fair price depends on the floor you choose, what is coming out and the condition of the slab. You get a written estimate after a free in-home measure.

Get a Free Flooring Estimate in Phoenix

We will measure the rooms, check the slab and give you a written estimate with removal, prep and installation listed separately.

Call 602-288-5346

Free estimate, no obligation

Call Now · 602-288-5346