
Choose luxury vinyl plank (LVP) for kitchens, laundry rooms, bathrooms and homes with pets, because its vinyl core is waterproof. Choose laminate for living rooms, bedrooms and offices if you want a harder, very scratch-resistant surface and a more wood-like feel, often for a little less. Installed costs overlap: about $4 to $16 per square foot for LVP and $4 to $14 for laminate, according to HomeGuide.
LVP and laminate look alike in the box and on the floor, and both click together as floating floors. The difference is what they are made of, and that decides which rooms each one belongs in. This guide compares them the way we do at an in-home estimate in Phoenix. For installation details, see LVP installation and laminate installation, or start at the homepage.
Luxury vinyl plank is built around a vinyl core, often a rigid stone-plastic or wood-plastic composite in today's click-together products, with a printed design layer and a clear wear layer on top. Laminate is built around high-density fiberboard, a pressed wood-fiber core, with a photographic design layer and a hard melamine top. That one difference, plastic core versus wood-fiber core, drives most of the comparison.
| Luxury vinyl plank | Laminate | |
|---|---|---|
| Core | Vinyl (waterproof) | Wood fiber (swells if wet) |
| Water | Handles spills and wet mopping | Wipe spills quickly; check the rating |
| Scratches | Good; depends on wear layer | Very good; hard melamine top |
| Feel and sound | Softer, quieter | Firmer, more like wood |
| Installed cost (HomeGuide) | $4–$16 per sq ft | $4–$14 per sq ft |
| Labor (HomeGuide) | $2–$6 per sq ft | $3–$8 per sq ft |
| Best rooms | Kitchens, laundry, baths, whole house | Living rooms, bedrooms, offices |
If a room has a sink, a washer, a pet water bowl or a door to the pool, LVP is the safer choice. Spills sit on top of a vinyl core without swelling it. A laminate plank whose edges soak up water can peak or cup at the seams, and that damage does not go back down. Some laminate is now sold as water-resistant, and it is better than older laminate, but read the warranty: many limit how long water can sit before damage is covered.
Phoenix floors take a beating from fine desert grit tracked in from the yard. Laminate's melamine surface is one of the most scratch-resistant finishes on any floor. LVP depends on its wear layer: a thin wear layer scuffs, while a thick one holds up well in busy homes. Either way, mats at every exterior door and felt pads on furniture make the biggest difference.
The Arizona State Climate Office counts about 94 days a year at 100°F or hotter in Phoenix. Both floors expand with heat, which is why each manufacturer specifies an expansion gap at the walls and limits on how long a run can go without a transition. Rooms with big west-facing windows or sliding doors deserve extra care: blinds or UV film help, and the gap at the wall has to be respected. Follow the product's own installation instructions; they vary.
The installed ranges overlap heavily. HomeGuide puts LVP at $4 to $16 per square foot installed, with materials at $2 to $10 and labor at $2 to $6. HomeGuide puts laminate at $4 to $14 per square foot installed, or $2,000 to $7,000 for 500 square feet, with labor at $3 to $8. In practice, a good laminate and a good LVP often land within a dollar or two of each other; the room decides more than the price. See our flooring installation cost guide for the full picture.
Many homes in Ahwatukee and Desert Ridge are replacing builder carpet with one continuous LVP floor. In older homes in Arcadia, the choice often depends on what is coming up first.
The vinyl core of most LVP is waterproof, so spills and wet mopping do not swell the planks. Water can still get under the floor at the edges, so a leak or flood still needs to be dried out.
Standard laminate has a wood-fiber core that can swell if water sits on it or gets into the seams. Some newer laminates are sold as water-resistant; check the product's rating and its warranty terms before using it in a wet room.
Laminate's hard melamine top layer is very scratch-resistant. LVP resists scratches through its wear layer, and a thicker wear layer holds up better. Both scratch less than real hardwood.
LVP, in most homes, because accidents and water bowls do not damage the core and it is quieter underfoot. Choose a product with a thick wear layer.
Both are floating floors that can often go over flat, well-bonded tile once the grout lines are filled to the manufacturer's spec. See our guide to putting LVP over tile.
We will measure the rooms, check the slab and give you a written estimate with removal, prep and installation listed separately.
Free estimate, no obligation
Checked November 18, 2026.
More guides: all flooring guides · Services: tile, LVP, hardwood, laminate, floor removal