Home › Guides

Can You Put LVP Over Tile? What to Check First

Old ceramic tile in a Phoenix hallway with its grout lines skim-coated flat, new luxury vinyl planks stacked beside it (illustration)

Yes, often. Floating LVP can go over existing tile if the tile is firmly bonded, flat (many manufacturers ask for about 3/16 inch over 10 feet) and the grout lines are filled to the product's spec. Loose, cracked or uneven tile should come out first, and you need room for the added height at doors and appliances.

Phoenix has a lot of tile that is dated but still solid, and taking it out is one of the slowest, dustiest parts of any flooring job. The good news is that floating LVP can often go right over it. Here is how we decide at an in-home estimate. For the full scope, see LVP installation in Phoenix, or start at the homepage.

The four checks

  1. Is every tile bonded? Tap across the floor. Hollow-sounding, loose or cracked tiles mean the bond is failing, and a failing floor under a new floor will keep failing. Loose tiles are re-set or the floor comes out.
  2. Is it flat? LVP instructions commonly require the base to be flat within about 3/16 inch over a 10-foot span; for example, this manufacturer's guide uses that tolerance. Lippage between tiles and dips in the slab show up as soft spots or gaps in the new floor.
  3. How deep are the grout lines? Requirements vary by product. One set of instructions says grout joints wider than 1/16 inch must be filled; another says to fill grout lines larger than 1/4 inch with a cementitious patch. A thin skim coat over the whole tile floor solves both.
  4. Is there room for the height? The new floor adds its own thickness. Doors may need trimming, the dishwasher must still come out, and the refrigerator space and transitions to carpet or other tile need checking.

When the tile should come out

  • Many loose, cracked or hollow tiles.
  • Tile that is badly out of flat, where filling would take more material than removal.
  • A bathroom where the height would trap the toilet flange or the tub edge.
  • Rooms where the new floor must line up with a lower floor next door without a ramped transition.

Removal costs $2 to $7 per square foot according to HomeGuide, so leaving good tile in place is a real saving. See floor removal and subfloor prep for what removal involves.

Rigid core vs. flexible LVP over tile

Rigid-core LVP is stiffer and bridges small grout lines and minor unevenness better. Thin, flexible or glue-down vinyl follows every dip in the surface below, so grout lines can show through within months. Over tile, we almost always recommend a rigid-core click plank, and we follow its instructions for whether an underlayment is allowed.

One caution for older homes

This guide is about ceramic and porcelain tile. If the "tile" is actually old vinyl floor tile, or there is black adhesive under it, do not sand or grind it: the EPA lists vinyl floor tiles, vinyl sheet backing and some adhesives among places asbestos may be found. Leaving such a floor covered can be an option, but have it tested before any work that disturbs it.

What about laminate?

Laminate can go over tile with the same flatness and bonding checks, but its wood-fiber core is less forgiving of moisture, so the instructions usually call for a moisture barrier. Compare the two in our LVP vs. laminate guide.

For costs, see our guide to the cost to install LVP flooring. Many homes in Moon Valley and Arcadia have tile that qualifies, which can take a day or more off the job.

LVP Over Tile Questions

Do I have to fill grout lines before installing LVP over tile?

It depends on the product. Installation instructions differ: one major LVP line we reviewed requires filling grout joints wider than 1/16 inch, while another says to fill grout lines larger than 1/4 inch. Follow the instructions for the plank you buy.

Will grout lines show through LVP?

They can, especially with thinner or flexible LVP. Rigid-core planks bridge small grout lines better, and skim-coating the tile flat removes the risk.

How much height does LVP over tile add?

The thickness of the plank and any underlayment, usually a few millimeters to about a third of an inch. Check door swings, the dishwasher opening, the refrigerator space and transitions to other rooms.

Is it cheaper to put LVP over tile?

Usually. It avoids tile removal, which HomeGuide puts at $2 to $7 per square foot, plus the slab grinding that follows.

Can laminate go over tile too?

Often, with the same checks for flatness and bonding. Laminate is less forgiving of moisture, so a moisture barrier may be required.

Get a Free Flooring Estimate in Phoenix

We will measure the rooms, check the slab and give you a written estimate with removal, prep and installation listed separately.

Call 602-288-5346

Free estimate, no obligation

Call Now · 602-288-5346