
A tile floor typically costs $12 to $50 per square foot installed, or about $1,200 to $5,000 for 100 square feet, according to HomeGuide. The tile itself runs $2 to $35 per square foot; the rest is labor, setting materials and prep. Removing old tile adds about $2 to $7 per square foot.
Tile is the most common hard floor in Phoenix homes and the most variable to price, because so much of the cost is labor and preparation rather than the tile itself. This guide lays out national figures. For how we install it, see tile installation in Phoenix, or start at the homepage.
| Item | Figure | Source |
|---|---|---|
| Tile floor installed | $12–$50 per sq ft | HomeGuide |
| Tile floor, 100 sq ft | $1,200–$5,000 | HomeGuide |
| Tile materials only | $2–$35 per sq ft | HomeGuide |
| Tile installation, 200 sq ft | $2,000–$10,000 | HomeGuide |
| Ceramic tile installed | $12–$40 per sq ft | HomeGuide |
| Porcelain tile installed | $7–$45 per sq ft | HomeAdvisor |
| Installation labor | $3–$15 per sq ft ($60–$120/hr) | HomeAdvisor |
The sources do not line up exactly because they measure different project mixes, so they are shown separately. The useful takeaway is the shape: tile material can be inexpensive, but setting it well takes skilled hours.
HomeGuide puts tile removal at $2 to $7 per square foot, or $200 to $1,400 for 100 to 200 square feet. Angi gives the same $2 to $7 range, about $3.50 on average, with dust-free removal at $3.50 to $7. In Phoenix homes, tile set directly on the slab is common, and getting it up cleanly takes a demolition hammer, a grinder for the leftover thinset and good dust control. See floor removal and subfloor prep.
Porcelain is denser and absorbs less water, which makes it the stronger choice for busy floors, but it is harder to cut and often comes in larger formats. Ceramic is easier to work with and is often less expensive. Our porcelain vs. ceramic tile guide explains the standard that separates the two.
Tile usually costs more installed than laminate or LVP because of the labor. In exchange it is waterproof, takes desert grit well and can last for decades. Compare every floor type in our flooring installation cost guide.
Tile is especially common in older homes around Arcadia and Biltmore, where a tile-to-tile replacement starts with removal. In newer areas such as North Phoenix, porcelain often replaces builder carpet in the main living areas.
HomeAdvisor puts tile installation labor at $3 to $15 per square foot, or about $60 to $120 an hour. Labor rises with large-format tile, small mosaics, patterns and a slab that needs flattening.
HomeGuide puts tile installation at $2,000 to $10,000 for 200 square feet, which is $10 to $50 per square foot.
Usually somewhat, because porcelain is denser and harder to cut, and it often comes in larger formats that need a flatter slab. HomeAdvisor puts porcelain at $7 to $45 per square foot installed.
HomeGuide and Angi both put tile removal at $2 to $7 per square foot; Angi lists dust-free removal at $3.50 to $7.
Tile is set by hand in thinset, cut around every edge, then grouted, and it needs a flat, crack-free base. LVP clicks together and floats. The material can cost about the same; the labor cannot.
We will measure the rooms, check the slab and give you a written estimate with removal, prep and installation listed separately.
Free estimate, no obligation
Checked November 18, 2026.
More guides: all flooring guides · Services: tile, LVP, hardwood, laminate, floor removal