Home › Guides

Porcelain vs. Ceramic Tile: What Is the Difference?

Glazed ceramic tile beside a dense through-body porcelain tile with water beading on the surface (illustration)

Porcelain is a type of ceramic tile. Under the ANSI A137.1 standard, a tile counts as porcelain only if it absorbs 0.5% of its weight in water or less. That makes porcelain denser and tougher, so it is the better choice for busy floors, wet areas and outdoors. Ceramic is easier to cut, often costs less and works well on walls and lighter-traffic floors.

Walk into any tile showroom and you will hear "porcelain" and "ceramic" used almost interchangeably. They are related, but there is a measurable line between them, and it matters for floors. For how we install either one, see tile installation in Phoenix, or start at the homepage.

The test that separates them

Both are made from clay and fired in a kiln. According to ANSI, the American National Standard for ceramic tile, ANSI A137.1, defines porcelain tile as ceramic tile with a water absorption of 0.5% or less. The absorption is measured with the ASTM C373 test method, which the Tile Council of North America calls the determining factor for whether a tile is considered porcelain. Ceramic tile that absorbs more than that is simply ceramic.

Low absorption comes from denser clay and higher firing temperatures. The result is a harder, less porous tile that stands up to wear, water and stains.

Porcelain vs. ceramic side by side

PorcelainCeramic
Water absorption (ANSI A137.1)0.5% or lessMore than 0.5%
Density and wearVery dense, very durableSofter; glaze carries the wear
ChipsThrough-body porcelain hides chipsA chip shows the clay body under the glaze
Cutting and installingHarder to cut; more laborEasier to cut and set
Installed cost$7–$45 per sq ft (HomeAdvisor)$12–$40 per sq ft (HomeGuide)
Best forBusy floors, wet rooms, patios, large formatsWalls, backsplashes, lighter-traffic floors

Which to choose for a Phoenix home

  • Main living areas, kitchens and entries: porcelain. It takes desert grit and heavy traffic best.
  • Bathrooms and laundry rooms: porcelain on the floor; ceramic is fine on the walls.
  • Patios and pool decks: porcelain rated for exterior use, with a textured, slip-resistant surface.
  • Bedrooms, closets and backsplashes: ceramic is a good, often less expensive choice.

Heat is not the issue it might seem: neither tile is bothered by the roughly 94 days a year Phoenix spends at 100°F or hotter, according to the Arizona State Climate Office. What heat does stress is the installation: tile needs movement joints at the perimeter and in large rooms so it has room to expand.

Watch for mislabeled tile

Because porcelain sells at a premium, tile has been sold as porcelain that does not meet the standard. The Tile Council of North America and the Ceramic Tile Distributors Association set up a porcelain tile certification program in response. If porcelain matters for your floor, ask for certified porcelain.

Installation matters more than the label

A porcelain floor on a slab with high spots and open cracks will fail before a ceramic floor set on a flat, properly prepared slab. Large-format porcelain in particular needs a very flat base and full thinset coverage. Read why in our tile installation cost guide, and see what slab prep involves on our floor removal and subfloor prep page.

Porcelain plank tile with a wood look is a popular choice in homes across Ahwatukee and Desert Ridge where owners want the look of wood with the durability of tile.

Porcelain vs. Ceramic Tile Questions

Is porcelain tile better than ceramic for floors?

For busy floors, usually. Porcelain's low water absorption and density make it more durable. A good glazed ceramic floor tile still works well in bedrooms, closets and other lighter-traffic rooms.

How can I tell if a tile is really porcelain?

Look for certification. The Tile Council of North America and the Ceramic Tile Distributors Association set up a porcelain tile certification program because of mislabeling. A through-body porcelain also shows the same color on its cut edge as on its face.

Is porcelain tile more expensive?

It often costs somewhat more, mostly in labor, because it is harder to cut and often comes in large formats. HomeAdvisor puts porcelain at $7 to $45 per square foot installed; HomeGuide puts ceramic at $12 to $40 installed.

Can ceramic tile go outside in Phoenix?

Porcelain is the safer choice outdoors. Its low water absorption is what makes tile rated for exterior use, and it holds up better on patios and pool decks.

Does porcelain tile crack more easily?

No. It is denser and stronger, but any tile cracks if the slab under it moves. That is why crack isolation and a flat slab matter more than the tile choice.

Get a Free Flooring Estimate in Phoenix

We will measure the rooms, check the slab and give you a written estimate with removal, prep and installation listed separately.

Call 602-288-5346

Free estimate, no obligation

Call Now · 602-288-5346