Home › Guides

How Much Does It Cost to Install LVP Flooring?

Installer clicking a gray luxury vinyl plank into place over a flat concrete slab in a Phoenix kitchen (illustration)

Luxury vinyl plank costs about $4 to $16 per square foot installed, according to HomeGuide: $2 to $10 for the planks and $2 to $6 for labor. A 200-square-foot room runs about $800 to $3,200. Removing an old floor and leveling the slab are extra.

LVP is the floor most Phoenix homeowners ask us about, and its price depends on two things: the plank you choose and what has to happen to the floor before it goes down. This guide shows national figures for both. For our installation scope, see luxury vinyl plank installation in Phoenix, or start at the homepage.

LVP cost per square foot

ItemPer square footSource
LVP / LVT installed (materials and labor)$4–$16HomeGuide
LVP / LVT materials only$2–$10HomeGuide
LVP / LVT labor$2–$6HomeGuide
LVT installed$3–$18 (about $6 average)Angi
LVT labor$2.50–$6Angi

The material range is wide because LVP ranges from thin glue-down planks to thick rigid-core planks with an attached pad and a heavy wear layer. For a busy Phoenix home with pets and grit, the wear layer is the spec worth paying for.

LVP cost by room size

HomeGuide gives these installed totals by floor size:

Floor sizeInstalled total (HomeGuide)
50 sq ft$200–$800
100 sq ft$400–$1,600
200 sq ft$800–$3,200

Larger jobs follow the same per-square-foot math. A whole first floor of 1,000 square feet would be about $4,000 to $16,000 at HomeGuide's range, and larger jobs often price toward the lower end per square foot because setup is spread over more floor.

What adds to the price

  • Taking out the old floor. Tile removal runs $2 to $7 per square foot according to HomeGuide. Carpet comes up much faster.
  • Slab flatness. Rigid LVP bridges small dips but not large ones. Manufacturers commonly require the floor to be flat within about 3/16 inch over 10 feet, so high spots are ground and low spots filled.
  • Underlayment or moisture barrier. Some products need one on concrete; Angi puts underlayment at $0.50 to $5.40 per square foot where needed.
  • Baseboards and transitions. Removing and resetting baseboards, undercutting door jambs and fitting thresholds at each doorway.
  • Stairs. Each stair is cut and fitted with a nosing, so stairs cost far more per square foot than open floor.

Glue-down vs. click-lock

Click-lock LVP floats over the slab and installs fastest. Glue-down LVP needs a smoother, cleaner slab and adhesive, which adds labor, but it handles big temperature swings near large glass well and suits commercial-style open spaces. We recommend the method the product and the room call for.

Ways to keep LVP affordable

  • Leave flat tile in place when it qualifies; see can you put LVP over tile.
  • Spend on the wear layer, not the pattern. A durable mid-range plank outlasts a premium-looking thin one.
  • Run one floor through. Fewer transitions means less trim labor.
  • Compare quotes line by line and check each installer on the Arizona Registrar of Contractors search.

Not sure LVP is the right floor? Compare it with laminate in our LVP vs. laminate guide, or see every floor type in the flooring installation cost guide.

LVP Installation Cost Questions

What is the labor cost to install LVP?

HomeGuide puts LVP labor at $2 to $6 per square foot, and Angi puts luxury vinyl tile labor at $2.50 to $6 per square foot, or about $30 to $60 an hour.

How much does it cost to install 1,000 square feet of LVP?

At HomeGuide's $4 to $16 per square foot, 1,000 square feet works out to about $4,000 to $16,000 installed, before removal of the old floor or slab prep.

Is glue-down LVP more expensive than click-lock?

Glue-down usually costs more in labor because the slab has to be prepped smoother and the adhesive takes time. Click-lock planks float, so they install faster.

Does LVP need underlayment?

Many LVP products have an attached pad; others call for a separate underlayment or a moisture barrier on concrete. The product's installation instructions say which. Angi puts underlayment at $0.50 to $5.40 per square foot where needed.

Can I save money by putting LVP over my tile?

Often, yes, if the tile is flat and firmly bonded and the grout lines are filled to the manufacturer's spec. It avoids tile removal, which HomeGuide puts at $2 to $7 per square foot.

Get a Free Flooring Estimate in Phoenix

We will measure the rooms, check the slab and give you a written estimate with removal, prep and installation listed separately.

Call 602-288-5346

Free estimate, no obligation

Call Now · 602-288-5346